首页 >> 产品中心 >>卧式刮刀卸料全自动离心机 >> GK卧式刮刀卸料离心机
详细说明

GK卧式刮刀卸料离心机

收藏
  • 产品说明

1.技术参数.png

项目

型号

GK800

GK1000

GK1250

GK1600

转鼓直径mm

800

1000

1250

1600

转鼓长度mm

450

500

625

800

转鼓容积L

100

165

370

690

最大装料限量kg

135

225

500

930

转鼓转速r/min

1550

1400

1200

950

分离因数

1080

1090

1007

808

电机功率kw

30

37

55

90

外形尺寸(长宽高)mm

2550*1850*1350

2400*2150*1700

3450*3300*2500

4200*2750*2300

机器重量kg

3500

6000

7500

15000


2.产品特点.png

  1. 采用PLC可编程序控制,可实现远距离监控,触摸屏操作,人机对话,操作、维护方便。

  2. 动作元件采用电-气/液压自动控制。

  3. 多重安全保护:转速检测,过振动保护,开盖保护,电机过载过热保护,刮刀旋转机械/电气双重控制。

  4. 焊接式整体机架,结构紧凑,机器承载强度高。

  5. 全密闭结构,密封件采用硅橡胶或氟橡胶。

  6. 独立式液压站,可隔离安装,方便检修。

  7. 采用液力偶合器传动(GK1250以下机型),启动平稳,控制简单,有效保护电机不受过载损害。亦可用变频器启动,适用多种运行速度要求。

  8. 浮动平台底座,橡胶减振基础。亦可选用阻尼式弹性减振器,减振效果优越,机器运转平稳,减小机器振动对设备和环境的危害。

  9. 二种出料方式选择:斜槽开放式出料,结构简单;螺旋输送器与刮刀集成卸料,滤饼收集率高,有效防止堵料。

  10. 虹吸式离心机具备虹吸推动力,过滤速度更快。可配置反冲洗装置,对过滤介质进行洗涤再生。还可配置撇液装置,适用含蛋白等胶体物质的物料分离。


  1. PLC programmable control, remote monitoring, touch screen operation, man-machine dialogue, easy operation and maintenance.

  2. The actuating components are automatically controlled by electric-pneumatic/hydraulic pressure.

  3. Multiple safety protection: speed detection, over vibration protection, open cover protection, motor overload and overheating protection, scraper rotating machinery/electrical dual control.

  4. Welded integral frame, compact structure, high bearing strength.

  5. Fully sealed structure, seals using silicone rubber or fluorine rubber.

  6. Independent hydraulic station, can be isolated installation, convenient maintenance.

  7. Using hydraulic coupler transmission (GK1250 model below), smooth start, simple control, effective protection motor from overload damage.Frequency converter can also be used to start, suitable for a variety of speed requirements.

  8. Floating platform base, rubber damping base.Can also choose the damping type elastic shock absorber, vibration reduction effect is superior, smooth operation of the machine, reduce the harm of machine vibration to the equipment and the environment.

  9. Two kinds of discharging methods: chute open discharging, simple structure;Screw conveyor and scraper integrated discharge, filter cake collection rate is high, effectively prevent plugging.

  10. The siphon centrifuge has the siphon impetus, the filtration speed is quicker.Backwash device can be configured to wash and recycle the filter media.It can also be equipped with a skimming device, which is suitable for material separation of colloidal substances such as protein.


3.工作原理.png

卧式刮刀卸料离心机是连续运转、间歇操作的过滤式离心机,控制方式为自动控制(也可手动控制)。

离心机操作过程中的进料、分离、洗涤、脱水、卸料及滤布再生等过程一般均在全速状态下完成,单次循环时间短,处理量大,并可获得较好的过滤(滤饼含水率较低)和洗涤效果。


Horizontal scraper discharge centrifuge is a continuous operation, intermittent operation of filter centrifuge, control mode for automatic control (manual control).

The feeding, separation, washing, dehydration, unloading and regeneration of press cloth in the process of centrifuge operation are generally completed at full speed, with short single cycle time, large processing capacity, and good filtration (low moisture content of filter cake) and washing effect.


4.产品用途.png

GK系列卧式刮刀卸料离心机广泛应用于化工、食品、轻工、制药、淀粉等行业,对含粗、中、细颗粒的悬浮液均适用,如硫铵、碳铵、聚氯乙烯、木薯改性淀粉等。


Gk series horizontal scraper discharge centrifuge is widely used in chemical industry, food industry, light industry, pharmacy, starch and other industries. 

It is suitable for suspension containing coarse, medium and fine particles, such as ammonium sulfide, ammonium bicarb, polyvinyl chloride, cassava modified starch and so on.


6.产品结构图.png

电子样本-22_03.jpg

关于中南
产品中心
联系我们
24小时服务热线
0512-58608979
新闻资讯

技术支持:卓成科技  

Copyright @2021-2024 版权所有:张家港市中南化工机械有限公司

客服中心
联系方式
0512-58608979
- 客服一
- 客服二
×
seo seo